loading
reading
writing
saving
searching
KRK VXT-8 POWERED 2WAY SPEAKERS - $675 (Wyncote)
make / manufacturer:
KRK
model name / number:
VXT-8
QR Code Link to This Post
These speakers were modeled after the KRK Expose series, which were very accurate, quite high ended and expensive.
I used these speakers in a treated mastering room, they were very accurate in the room, and translated very well.
*Two extra tweeters and power cables included.
Rear switches to tailor the low and hi end frequency adjustment. The low end goes down low enough for a good translation for mixing bass and drums etc.. the high end is not shrill and is neutral. The midrange is also very good and not too shrill.
A lot of monitors are dipped 2-4 db in the midrange area,and are made to sound smooth. You don’t want that because they will not reveal the harshness in your mix!
Cash only!
—Unfortunately due to scams, phone scams and those who collect phone numbers on craigslist in order to spam call, I do not give out my phone number.
But I'm happy to answer any questions via Craigslist email system.
*Specifications:
The KRK VXT8 is a 2-way active studio monitor with an 8-inch woven Kevlar woofer and a 1-inch soft dome tweeter. It features a Class A-B amplifier with 120W for the woofer and 60W for the tweeter, delivering a total of 180W of power. The VXT8 offers a frequency response of 37Hz - 22kHz (+/- 3dB) and a maximum peak SPL of 114 dB.
—Configuration: 2-way active studio monitor
Low-Frequency Driver: 8-inch woven Kevlar woofer
High-Frequency Driver: 1-inch soft dome tweeter
Frequency Response: 37Hz - 22kHz (+/- 3dB)
Max Peak SPL: 114 dB
Amplifier Type: Class A-B
Power Output: 180W total (120W woofer, 60W tweeter)
Input Impedance: 10 kOhm balanced
Input Connectors: Balanced 1/4" / XLR combo
Ground Lift: On/Off
HF Level Adjust: +1dB shelf / Flat / -1dB shelf
LF Level Adjust: Whole, half, quarter
System Volume: -30dB to +6dB
Auto Mute: On/Off
Indicators: Power, Clip, Limit
Enclosure: Structural foam with black textured paint
Port Configuration: Front-firing slot port
Dimensions: 17.06" (H) x 12.51" (W) x 11.66" (D)
Weight: 41 lbs (16.5 kg