YAMAHA Audiophile's Stereo System -- Mx2000 / CX2000 and More -- - $2900 (West Chester)

YAMAHA Audiophile's Stereo System -- MX2000 / CX2000 and More -- Absolutely The best

I am in the process of downsizing and have a complete highest end system that has few hours on it since purchase in early 90s. I am giving the specifications on the pre-amplifier (CX-2000) and the amplifier (MX2000) and listing the other components below. I paid more than $10,000 for the system (without the KEF speakers which are listed separate). Was listed for $5000 and reduced to $3800 for whole system w/o speakers. Willing to sell amp and pre-amp separately for $2900

Everything is MINT condition in original boxes with manuals. Please note they are not connected for operation but packed for transfer. Recently had a potential buyer bring his connectors and thoroughly test the amp & pre-amp to his sound source - all worked excellent!

Cash only on local pick-up

Stereo Main Amplifier MX2000

This amp is beautiful. Many hold this amp as their "holy grail" of audio amplification. Sound is smooth and very detailed, with an enormous 3D soundstage. Beautiful to listen to, and even to look at. The MX-2000 is the audiophile's choice at the time.

Beautiful power amplifier from Yamaha. The MX-2000 was part of their Centenial Edition in 1988. The rare Mx-2000 is a scaled down version of the legendary MX-10000 ($11000 when new). Large Power meters, stainless steel "box" and wood sides. The MX-2000 is a very serious amp - almost a work of art, and was available by special order only. ($4000.00 when new)
It puts out 130 watts into 8 ohms, but those are some very refined watts.
It's heavy at 62 pounds, pure class A MOSFET design, and all hand-made solid construction w/titanium-cherry finish.

Minimum RMS Output Power per Channel 20Hz 20 kHz
0.005% THD, 8 ohms 130W +130W
0.005% THD, 6 ohms 150W + 150W
0.01% THD, 4 ohms 180W + 180Ws
Dynamic Power per channel (IHF) 1 khz:
8 ohms 180W; 6 ohms 240W; 4 ohms 340W; 2 ohms 490W; 1 ohm 600W
Frequency Response 20Hz 20kHz, MAIN IN +0, -0.3dB
Total Harmonic Distortion (20Hz 20kHz)
MAIN IN TO SP OUT, 130W, 8 ohms 0.005% Signal to Noise Ration (IHF-A-Network)

Installer Manual internet link

Yamaha CX-2000 Natural Sound Stereo Pre-amplifier
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.001%
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 91dB (MC), 95dB (MM), 106dB (line)
Channel separation: 70dB (MM), 70dB (line)
Output: 150mV (line), 1.5V (Pre out), 12V (Pre out Max)
Dimensions: 473 x 130 x 400mm
Weight: 12.2kg

Other Components Included in the whole system:

Yamaha Compact Disc CDX2020
Yamaha Stereo Tuner AM/FM TX2000
Yamaha Stereo Cassette KX W602

If the amp & pre-amp are sold as a stand alone, then each of these components will be sold separate

Optional Stereo Equipment and prices

KEF Speakers 104/2 (Pair) $950 selling separately

KEF Speakers 104/2 (Pair) These are beautiful in sound and also looks.
I had two pairs of these and sold one pair this past year. Each pair were purchased for $3200
Made in England, the model 104/2 -- a loudspeaker was innovated and produced to develop a strong reputation around the world for its technical innovation and acoustic performance. Such was its success that it remained in production for over ten years. Cabinets are a piece of furniture.
Model 104/2 is high output, high sensitivity speaker system possessing exceptional dynamic capability, able to reproduce a very wide dynamic range at high output levels. The optional KEF KUBE equaliser was available to extend the low frequency response down to 20Hz (-6dB, Q=0.5). Technical features included chassis-less midrange units, conjugate load matching and the twin coupled cavity bass reproduction system. A bi-wired version was introduced in 1990 and it was later included in the Raymond Cooke Series along with the Reference Series Models 107/2 and LS3/5A.

Specification: Model 104/2
System Type: Three-way, floor standing
Enclosure type: Coupled cavity
Size: 900 x 280 x 415mm (35.5 x 11 x 16.5 inches)
Weight: 32kg (70.5 lb)
Nominal Impedance: 4 ohms resistive (20Hz-20kHz)
Rated maximum power: 200W programme
Amplifier Requirements: 25-200 watts per channel into 4 ohms
Frequency response (standard): 55-20,000Hz +/-2dB at 2m on design axis
Frequency response (with matching KUBE): 35-20,000Hz +/-2dB at 2m on design axis (-6dB at 20Hz, Q=0.5)
Sensitivity: 92dB at 2m on reference axis for a pink noise input of 2.83V (anechoic conditions)
Maximum output: 112dB on programme peaks under typical listening conditions
Finishes: Selected real wood veneers
Grille: fabric
System: SP3037
Drive units: 2 x B200 bass unit (SP1188), 2 x B110 midrange unit (SP1190), T33 tweeter (SP1191)
Crossover: SP2050 (1984 only: SP2042, 2043, 2046).
System: SP3128 (Bi-Wire version, 1990 onwards)
Drive units: 2 x B200 bass unit (SP1256), 2 x B110 midrange unit (SP1274), T33 tweeter (SP1191)
Crossover: SP2173

  • do NOT contact me with unsolicited services or offers

post id: 6947291905



best of [?]