craigslist | tools in philadelphia

I BUY ALL TOOLS! READ-CASH NOW! (FOLSOM) $10000

2009-11-10T08:21:02-05:00

HELLO--I BUY JUST ABOUT EVERY TOOL YOU MAY HAVE!---NEED THAT EXTRA XMAS CASH? I HAVE IT!--LOOKING FOR SNAP ON, HILTI, BOSCHE,DEWALT--ECT,ECT--GENERATORS, LADDERS,--WHAT DO YOU HAVE?? CASH ON THE SPOT. MY REPUTATION IS UNMATCHED--HONEST/FAIR AND TO THE POINT------YOU GET PAID!! I BUY 7 DAYS A WEEK, I WILL EVEN TRAVEL FOR LARGE COLLECTIONS. I PRIDE MYSELF ON FAST SERVICE....DONT WAIT..EITHER STOP BY OR GIVE ME A CALL--1505 MACDADE BLVD FOLSOM PA(ACROSS FROM RITAS WATER ICE) OR 484 571 1939.... STOP BY OR .GIVE ME A CALL AND LETS DEAL----THANK YOU.....

Airco 300 amp ac/dc heliwelder (Glenolden) $500

2009-11-10T07:06:09-05:00

This is in excellent condition and comes with leads

Craftsman 7-1/4 in. Sliding Compound Miter Saw (new in box) (Perkasie, PA) $110

2009-11-10T06:39:53-05:00

This miter saw is regularly $169.99. I bought it for a project but ended up contracting it out and never opened the box (still sealed and strapped); however, Sears wouldn't take it back since it has been more than 90 days.

Product Description
Ideal for miter, bevel and compound angle cuts, this compound miter saw from Craftsman features a dual slide rail system that allows for up to 8 in. diameter crosscut widths. Its AC-powered Laser Trac projects an accurate line on the work piece for precise cuts, and the 7-1/4 in. diameter 40-tooth carbide-tipped saw blade stays sharp and makes clean cuts. Includes dust bag.
* Hold Down Safety Clamp provides extra support, can be located on either side of blade
* Die-Cast Aluminum Construction for lightweight, job-to-job portability
* Built-In positive Miter and Bevel Angle Cuts at the most commonly utilized angles (Miter - 0, 15, 22.5, 31.6, 45 deg. (L & R); Bevel - 0, 45 deg. (Left))
* 120 volt, 5,000 rpm Ball-Bearing Motor
* 7-1/4 in. 40T Carbide-Tipped Blade with 5/8 in. Arbor
* Horizontal D-shaped Handle with Trigger Switch and wrench storage

WOOD SHAPER (CLIFTON HTS) $100

2009-11-10T06:38:31-05:00

I DONT KNOW WHAT KIND IT IT IS

10 INCH MITER SAW (CLIFTON HTS) $150

2009-11-10T06:35:49-05:00

10 INCH MITER SAW WITH HOME MADE TABLE

CHRAFTSMAN RADIAL ARM SAW (CLIFTON HTS) $250

2009-11-10T06:32:14-05:00

10 INCH RADIAL ARM SAW GOOD WORKING SAW

Cub Cadet 83 Hours,20 H.P Tractor with Dual Stage snow Blower (Pottstown,pa)

2009-11-10T06:22:05-05:00

CUB CADET Model # 3204 with only 83 HOURS, 2003 Year, 48� DUAL STAGE Snow Blower with HYDRAULIC POWER LIFT , 44 � Mowing Deck, Both Blower and the Deck are PTO Driven, POWER STEERING, Chains with Rubber grips, Four 50 LB weights and room for more , In absolute New Condition = 4500.00 OBO

PA EMISSION DYNO (CLIFTON HTS) $1500

2009-11-10T06:12:00-05:00

IT IS WHAT IT IS A DYNO EMISSION MACHINE USED ON 1995 AND OLDER CARS AND TRUCKS I MUST GET IT OUT OF MY SHOP BEST OFFER TAKES ITU CAN CALL ME AT 610-623-7187 OR EMAIL

Hand Truck for sale (Mt Airy) $35

2009-11-10T01:16:17-05:00

I have a hand truck for sale
anyone interested email me with name and number..

I used it for a moving business but we are now closed up..due to weather conditions anyone interested pick up only cash and carry!

NO CHECKS, NO CASHIERS CHECKS!

Pick up only!

Call 215-839-8290

Big Joe manual forklift (Bensalem) $200

2009-11-10T00:39:15-05:00

This lift has 24" forks that moves around on caster rollers.I purchased from a man that used it to unload spools of wire off his truck in his garage. I used it for putting engines 500+ lbs) on engine stands and removing them. It uses a hydraulic ram and lifts to aproximately 4'. I have no need for it anymore. It could use some new rollers. No lowballers, or scammers!!!

7 Ton Log Splitter - Different models available - New in box (Philadelphia area) $325

2009-11-10T00:33:19-05:00

Brand new in box, 1 yr warranty, $325 no tax. Three different models in stock, black or red, or with dolly. Will split any log up to 21" long, and generally up to 12-15" diameter. If interested, let me know. You can see one in action here: http://www.youtube.com/watch?v=cMqDAu8pV6k

Drywall Sander w/ Vac for sale (Phila) $275

2009-11-10T00:29:14-05:00

Both are new in box for $275. 650w variable speed motor, 1 yr warranty, let me know if interested. Don't pay $500+ for these in local stores!

Miller Blue Star 3500 welder/generator (Bensalem) $1300

2009-11-10T00:27:42-05:00

This is a Miller BlueStar 140 amp DC welder / 3500 watt generator. It is in really nice shape and has a 9 hp HONDA engine that starts on the first pull. There are 4-standard 120v recepticles and 1-120v/30 amp twist lock recepticle. It welds nicely and works as it is supposed to. I added wheels to make it easier to move. Would consider trade for Nova, El Camino or skid steer / equipment trailer.

SNAP ON ALIGNMENT TURN TABLES & GAUGES (LANSDALE, PA) $300

2009-11-10T00:24:29-05:00

Snap On Front End Alignment Turn Tables & Castor/Camber Gauges. Nice Condition. Call 610 608-6540 9AM to 9PM EST

MAC TORX SOCKET SET (BRISTOL.PA) $85

2009-11-10T00:23:54-05:00

MAC 3/8 TORX SOCKET SET11 PCS. 85.00

215-778-7232

LARGE SNAP-ON WRENCHES (BRISTOL.PA) $200

2009-11-10T00:17:55-05:00

SNAP-0N LARGE SIZE WRENCHES 6 PCS.

1" 1 1/16 1 1/8 1 1/4 1 5/16 1 5/8

200.00 215-778-7232

Craftsman Dual Motion Sander (Phoenixville) $20

2009-11-09T23:46:16-05:00

Model No. 315.11631
Straight-Line, Dual Motion or Orbital

Used Craftsman Dual Motion Sander in good working condition.

Double insulated, replaceable brushes, uses 3 1/2 x 9 sandpaper, and comes with original users manual.

$20

Craftsman 3-Gallon Tool-Vac with Auto-Switch (Phoenixville) $55

2009-11-09T23:44:53-05:00

� Use with your power sander and saw when installing drywall, woodworking, auto body repairs, sanding wood floors and more
� Simply connect Tool Vacs hose to your electric tool
� Then plug electric tool into outlet directly on Tool Vac
� 3-postion switch allows vac to work independently for general cleaning. Housing has built-in carrying handle.

This vac has been used infrequently and is in excellent condition. Includes Filter and original instructions

$55

RFI A/C REFRIGERANT MANAGEMENT CENTER (LANSDALE, PA) $2000

2009-11-09T23:34:57-05:00

RFI A/C Refrigerant Management Center. Works with R12 & 134A refrigerant. Great Condition. Works Well. New $4000.00 asking $2000.00. Call 610 608-6540 9AM to 9PM EST

TRANSMISSION JACK, 1000 LB BLACKHAWK (LANSDALE, PA) $500

2009-11-09T23:32:19-05:00

Transmission Jack, 1000 pound, 2 Stage Cylinder. Extends from 32 1/2" down to 72 1/2" up. New Cylinder & seals. Works Great. GOOD STURDY JACK. Call 610 608-6540 9AM to 9PM EST

BISHMAN COMPUTER WHEEL BALANCER (LANSDALE, PA) $500

2009-11-09T23:30:45-05:00

Bishman Computer Wheel Balancer. 220V. Works good. Comes with Adapters & Weights. Call 610 608-6540 9AM to 9PM EST

drywall lift (Philadelphia) $350

2009-11-09T22:46:05-05:00

brand new in the box drywall lift,applying drywall up to 15',purchased for the job,but did not have it,for more info call 215-760-9649

lot of tools! (DELCO) $1

2009-11-09T22:34:54-05:00

In the first picture there are
Snap On 15/16" 6 PT deep impact socket for 1/2" drive
Snap On 11/16" 6 PT deep impact socket for 1/2" drive
Proto 1 1/4" 6 PT impact socket for 1/2" drive
Snap On 6" extension bar for 3/8" drive
Snap On 1/2" 6 PT for 3/8" drive (made in 1967)
Snap On 11/16" 6 PT for 3/8" drive
Snap On 13/16" 12 PT for 1/2" drive (made in 1947)

In the second picture there are
One Husky vise grip, which appear to have been made in 1940's
Two Large Lockjaw vise grips
One small Lockjaw vise grip

In third picture there are
Craftsman ratcheting wrench 11/16"-7/8"
Craftsman ratcheting wrench 5/8"-3/4"
KD TOOLS ratcheting wrench 17MM- 21MM
SK TOOLS 7/16 combination wrench 6PT
SK TOOLS 7/16 combination wrench 12PT
SK TOOLS 1/2" 12 PT socket for 1/2" drive
Fairmount open ended wrench 11/16"-9/16"
TWO GB insulated screwdrivers
ONE Greenlee 5-in-1 screwdriver

In fourth picture, there are
Craftsman nutdrivers in these sizes; 3/16" 3/8" 11/32" and 7/16"
Task Force utility knife
Torque wrench
and a bunch of screwdrivers

Also u will be getting a free toolbox to carry all those tools in

Everything pictured here for $75. Now you might think thats too much money, but dont forget, those snap on and craftsman tools are worth much more than that, so u are getting a good deal here. If u still feel thats too much, im willing to hear best offers or trades for any other craftsman tools or toolboxes.

Also if u prefer to buy some tools instead of the whole thing, thats also acceptable, just either email me or text me for whichever u want

u can email me at above link, or text me at 856 366 6364 for faster response time. PLEASE TEXT, instead of calling me cause i cant hear, thanks!

The Big Wire Caddy $50 if you come on my day off ;) (NE Philly ) $60

2009-11-09T22:30:39-05:00

Big caddy for the Micro duck for Verizon or coax of any kind and any cable company Tony 215-852-9460 I have 4 of them they go for like 85 any where you look for them .I also have the middle bars . easy to pull with wheels ;) will take calls tell 11 pm after that machine if you would like to see my other stuff put my # in the search box when you first sign in on the left and hit enter ;)

Horizontal Rotary Table (Near Philadelphia) $870

2009-11-09T22:03:50-05:00

Horizontal Rotary Table - ENCO

12 " Diameter
Center Bore 1" Diameter
Table Height 5"

Specifications:
Gear Ratio - 90:1

Includes Tailstock

Snow Thrower - Ariens St 624 E (Levittown ) $750

2009-11-09T21:57:00-05:00

Bought in 2005, used twice: Pictures available by request

Ariens ST624E

Power Source
6 HP Tecumseh� Snow King� L-Head Snow OHV Engine
120 Volt Electric Start with recoil backup
3.5 quart fuel tank capacity
Standard Dual Handle Interlock Control System
6 speeds forward / 2 speeds reverse

Structure
Snow clearing width of 24"
Large housing height of 17.5"
200�, 2.5x Quick-Turn chute rotation
Manual deflector control
Heavy duty reversible skid shoes
Standard clean out devicce attached directly into unit for quick access

Internal Systems
Durable Aluminum Gear Case with alloy steel auger gears with specially blended lubricant for long lasting, smooth performance
3-Blade, 12" steel impeller
Steel Serrated augers
Disc-O-Matic� drive

Craftman miter saw (Croydon) $75

2009-11-09T21:47:06-05:00

Craftman miter saw...excellent condition...used one time...$75

chain saw -18 '' (phila) $150

2009-11-09T21:13:45-05:00

echo chain saw like new 18 '' modle cs 400 ------call 215-869-1318 gas

Roofing lift ladder engine (NE Phila) $200

2009-11-09T21:13:06-05:00

Good shape and working Roofing lift ladder engine $200

floor buffer clarke (phila) $250

2009-11-09T21:09:59-05:00

clarke fm -1700-model super heavy duty ele floor buffer polisher and scrubber used 215-869-1318 $250

24' alum ladder (phila) $150

2009-11-09T21:09:16-05:00

24' alum ladder new 215-869-1318

DeWalt Emglo D55155 Air Compressor USED H-Duty 1.2hp (NE Phila) $200

2009-11-09T21:09:03-05:00

This unit is in very good and working condition. Has no problems! $200

20' alum ladder (phila) $100

2009-11-09T21:05:12-05:00

20' aluminum ladder
new never used
Class A Louisville
Retail 189.00
Call 215-869-1318

Twin Tank Compressor (Philadelphia) $125

2009-11-09T21:04:27-05:00

Husky Twin Tank Compressor

6 Gallon

Like new

$125 00 Firm

call 215-869-1318

Compressor / 20 Gallon (phila) $150

2009-11-09T21:03:26-05:00

Husky Compressor

20 Gallon

New Never Used

$150.00 Firm

call 215-869-1318

Power Washer (Phila) $200

2009-11-09T21:02:38-05:00

Power Washer -- Husky 2600 psi Gas Powered New
$200 Firm
215-869-1318

Generator (Philadelphia) $350

2009-11-09T21:01:53-05:00

Generator

****Coleman****

1800-2250 watts

Still in box

has been used a couple of times

Runs GREAT

$350.00 FIRM

215-869-1318

Power Washer (Philadelphia) $250

2009-11-09T20:58:31-05:00

Power Washer
Gas
*******

***

***

3000 psi

Husky --- Powered by Honda

FIRM $250

215-869-1318

AIR COMPRESSOR (Philadelphia) $200

2009-11-09T20:57:21-05:00

Air Compressor

DeWalt

15 Gallon

200psi

like new used several times

Runs GREAT

$200.00 FIRM

215-869-1318

miter saw with laser (phila) $180

2009-11-09T20:55:10-05:00

10'' sliding compound miter saw with laser model tss100L 215-869-1318 $180

ladder 24' (phila) $180

2009-11-09T20:54:15-05:00

warner ladder 24' new fiberglass 215-869-1318

Jigsaw (Middletown) $30

2009-11-09T20:50:52-05:00

AMT jigsaw. Barely used.

Welder (Phila) $200

2009-11-09T20:49:36-05:00

Lincoln welder
Arc stick
220 hook-up
used couple of times ** Like new
retails $399.00
call 215-869-1318

twintank compressor (phila) $150

2009-11-09T20:47:18-05:00

ridgid twintank compressor like new 175psi 215-869-1318

pancake compressor (phila) $125

2009-11-09T20:46:05-05:00

porter cable pancake compressor
new
150 psi to lines
$125 firm
215 -869-1318

drywall stilts & surveyor tripod (ft washington) $150

2009-11-09T20:44:58-05:00

set of stilts $100 surveyor tripod $50

Unibody Frame Straightener (Media) $3000

2009-11-09T20:13:52-05:00

JAK-RAK Unibody system Excellent condition Will do the job

Electric / Hydraulic Motorcycle Lift (Harleysville) $600

2009-11-09T20:05:23-05:00

Electric/Hydraulic motorcycle lift built on 3000lbs capacity American Lifts Model P-48-030 floor lift. Extremely heavy duty. 24" x 96" deck, wheel chock and eyelets. 120v. Foot operated raise and lower.
Like the one pictured but, without wheels. $600.

OTC Tire Pressure Monitor No. 3833 (Lansdale, Pa) $200

2009-11-09T20:00:14-05:00

OTC Tire Pressure Monitor No. 3833

New In Box. Missing Manual...Can be Downloaded From OTC's Website www.otc.com

Designed to be a complete, universal kit covering vehicles with Tire Pressure Monitoring System (TPMS). The software contains a vehicle entry system for easy and accurate access to the correct interface for a vehicle.

Displays sensor data, such as ID and pressure. Data is dependent on system type.

Updateable via serial cable to PC to keep up with changing vehicle requirements.
Maintains "last vehicle" use history.
Three "C" batteries provide hours of continuous use. (Auto shutdown is after three minutes of inactivity.)
Carries a 3-year Mfgr warranty.
The monitor has a graphical interface that allows use of the tool with little or no knowledge of TPMS. The manual contains critical reset procedures, along with all system information, including torque specifications and wiring diagrams. BRAND NEW< NEVER USED

WANTED Wedge Bed Planer Rockwell/Delta

2009-11-09T19:50:23-05:00

Wanted Delta Rockwell 18" X 6" Wedge Bed planer running or parts unit. Can move unit out of basement if need to.
Please call Tom @ 717-598-3676

4' YAMAHA PLOW ~ATV - 4 WHEELER - TRACTOR 48" NICE ITEM MUST SELL (Skippack OBO) $95

2009-11-09T19:48:02-05:00

This item is in good shape. Best offer takes it. We sold the ATVs so the stuff must go too. We also have a Kolpin rear mount bin with drop down tailgate for $100.00 OBO.

Any questions just email and I will call you or give you my cell number.

Near the Turnpike, 113, 422, 63, easy location for pickup.

Tool Chest (Ambler ,PA) $125

2009-11-09T19:35:03-05:00

Tool chest close to as pictured. Must pickup.

Brick Trowel (Jenkintown) $5

2009-11-09T19:04:16-05:00

Brand New 7" Brick Trowel. Contact Denise at 215-576-6228.

Portable Generator (Southampton) $250

2009-11-09T18:53:40-05:00

Champion Portable Generator - comes complete with owners manual and operating instructions . 3500 Peak Watts/3000 Running Watts. Fuel Tank -4.0 gallon capacity. Fuel Valve , Choke, Air Cleaner, Recoil Starter, Low Oil Sensor, Oil Filler Cap and Power Panel . used only once ,like Brand NEW .

Call : John - 215-208-9261 . Please no emails . CASH only

delta pro.....truck tool box (excellent shape) (ne philly 19111) $175

2009-11-09T18:46:30-05:00

measurements.........20inches high, 20inches deep, 54inches wide........................this box is in excellent shape, it is very clean on the inside. it was barely used for tools, mostly to transport material. only $175.00

System One Ladder Rack Cheap (Springfield Del Co.) $450

2009-11-09T18:44:50-05:00

! year old system one ladder rack system, I bougt these while in business and have no use for them any more. I'm def. just about giving them away, I payed $900 installed. Very nice, they fit a 6 ft bed and has over the cab extension. Very nice system, it's a freaking steal so come get them.

Call me, Steve at 484-574-0274

srcameron84@msn.com

I can post pics but I didn't have the time too, you are more than welcome to com see them also.

McCullough Weed Wacker~~~Moving Must Sell (Glenolden, PA) $20

2009-11-09T18:29:02-05:00

Weed Wacker

Great Condition

Moving Must Sell!!!!

Only $20.00

610-803-6279

Roll Away tool box (Springfield Delco) $150

2009-11-09T18:28:38-05:00

What you see is what you get. all three peices and the side shelf. Has been used since 2000 in my garage and I finally upgraded to a bigger box. Call Pat at 610-633-7029. No calls after 9pm please

Craftsman Compressor~~~Moving Must Sell (Glenolden, PA) $60

2009-11-09T18:27:22-05:00

Craftsman Compressor

2 Gallon

1.5 Horse Power

125 PSI Max Air Delivery

Accessories Included

Only $60.00

610-803-6279

10" Ryobi table saw with stand (Feasterville) $100

2009-11-09T18:26:32-05:00

Good condition, extention table, mitre attachment

craftsman air compressor 6hp 60 gallon (ne philly) $400

2009-11-09T18:21:31-05:00

used like new craftsman air compressor 6hp 60 gallon comes with approx 50 ft hose and accesories. please email chongy79@yahoo.com for pics or call dominic 267-625-1046

25 ft retractable hose reels damaged rubber hose (Highland Park Upper Darby) $20

2009-11-09T18:20:48-05:00

Harbor freights 25 ft retractable hose reel with rubber hose. Not used that long, reel works fine. Frame of mount was bent, but it was bent back, does not affect operation. Hose was accidently left out under vehicle and got dragged and has abrasions through to inside in a couple of places. Hose could be replaced or you could tape/patch hose to make is usable. Hey, I am asking 20 dollars. I taped it already but not sure if it is holding air with my taping job. Just replaced with new reel/hose.

I also have 2 truck tires for sale in auto parts. 225/70/19.5

Call 484-557-8519 if you wish to purchase and get directions. Thank you.

Anti-Vibration Work Gloves (New Hope, PA) $15

2009-11-09T18:14:23-05:00

Decade anti-vibration gloves, medium, excellent condition. Cash/pick up only.

COMMERCIAL TAPE DISPENSER (NE PHILADELPHIA) $75

2009-11-09T18:14:02-05:00

GUMMED TAPED DISPENSER.
MADE BY MARSH
MODEL NUMBER 5HT
HAND TAPER
GOOD CONDITION.
WILL DELIVER OR MEET UP WITH YOU.

snap on black kra2308 top box (n/e) $750

2009-11-09T17:41:52-05:00

i have for sale a black snapon kra2308 toolbox i am asking $750...........i have pics on my cell i can text to you.........any ? call 215-921-0620

36 INCH CONCRETE SAWBLADE (NE PHILADELPHIA) $400

2009-11-09T17:40:37-05:00

THIS IS A BRAND NEW, NEVER USED.
36 INCH CONCRETE WET SAW BLADE. 36" X .160" X 1"
CT: PWC-PROTO-36166/8.5
SACRIFICING FOR $400!!!
I WILL DELIVER OR MEET YOU HALF WAY.

3/4 ingersoll rand IR impact (boothwyn)

2009-11-09T17:31:02-05:00

3/4 IR impact gun barely used make offer
call 484-410-1590

dewalt screwdriver 7.6v (boothwyn)

2009-11-09T17:30:24-05:00

dewalt screwdriver 7.6v two batteries and charger
make offer
call 484-410-1590

HOIST FRAME, LIFT, ETC.... (O.B.O.(N.E. PHILLY)) $3000

2009-11-09T17:15:58-05:00

This is a Heavy Duty Frame built out of 4 inch tubular steel. Can be used to do any kind of heavy lifting. Roof could be put on to work on equipment outside. It has large rubberized caster wheels that lock on the footers. It could be used to pull engines on most anything, or be used for numerous heavy things that could be moved around on concrete easily. It is about 10 foot high, 12 foot long, and 7-8 foot wide. If interested contact Ben at 267-745-1361

Flashlight Radio (NE Philadelphia) $20

2009-11-09T16:07:04-05:00

Brand new Flashlight/Radio - $20

3000 SOCKETS, loose, 1/4, 1/2, ansd 3/8-inch (Bluebell) $1000

2009-11-09T15:56:50-05:00

I have approximately 3000 loose sockets in 1/4-inch, 1/2, and 3/8-inch......Most are unused and are CRAFTSMAN brand. All are in several bins, and are mixed and loose, with NO original packing.....take them all for $1000, and sell them at flea markets, and so on.....I don't have the time to do this anymore.....I am not going t take photos......If you don't know what a socket looks like, you don't want them.....

2004 Murray Snowblower 28" deck (West Chester) $1100

2009-11-09T15:34:14-05:00

This snowblower is in very good condition. has only been used 3 or 4 times when snow was to deep to shovel. has been well taken care of. starts of first pull. also has electric start if you dont want to pull start it. the tires have 100% tread left no wear at all. all gears work 1-6 and both reverse work. runs on regular gas. for more information you can email me at mike89kozak@aim.com or call me at 484-947-3724 will not take anything less then 950. will deliver for a fee. thanks

\\\ Sonin Moisture Test Meter Model 50211 /// (New London, PA) $50

2009-11-09T15:29:25-05:00

Sonin Moisture Test Meter, Model 50211 for wood, sheetrock, concrete and plaster. Reads in two scales, both relative (0-10) as well as moisture percentage (10-18%). Almost new since there has been very little use. Terms are $50, cash. Must be picked up from my location...approximately 11 miles outside of Newark, DE.

\\\ Magnaflux Weld Test Kit /// (New London, PA) $50

2009-11-09T15:24:36-05:00

Magnaflux Weld Test Kit, complete with carry case and instructions. Never used. Cost $100 new. Will sacrifice for $50, cash. Must be picked up my location...approximately 11 miles outside of Newark, DE.

HARLEY DAVIDSON HARD HAT (PHILA/MONT COUNTY) $28

2009-11-09T15:12:18-05:00

HARLEY DAVIDSON HARD HAT,BLACK W/ORANGE FLAME,ALSO HAVE SILVER & BLACK HD HARD HAT,

Ladder Safty Hoist (N.E. Phila) $900

2009-11-09T14:55:34-05:00

Safty Hoist Ladder lifts 200 to 400 Lbs. Great for putting material to high places. Puts together in minutes! Call 267-228-7275 to see!

Craftsman 16.8 Volt Cordless Drill/Driver Combo Pack (Collegeville) $45

2009-11-09T14:19:12-05:00

Here we have a Craftsman 16.8 volt cordless drill/driver with light. Includes drill, (2) batteries, and charger with work light. Item is in excellent condition and was used very little. Batteries have been charged and have been holding a charge for a month prior to listing today, so the batteries and charger are in excellent working condition also. Drill has Hi/Lo switch and variable speed/reversible. Please feel free to email with any questions and thanks for looking.

Hammer Drill (Northeast Philadelphia) $60

2009-11-09T13:40:40-05:00

Used Milwaukee hammer drill. The drill is still in good working order and it comes with its original metal carrying case. Please e-mail me with any further inquires.

LOOKING FOR SMALL SNOW BLOWER (Douglassville, Pa.)

2009-11-09T13:39:39-05:00

NEED A 21"TO 24" SNOW BLOWER PHONE: 610-608-0051

ladder jacks (19008) $100

2009-11-09T13:38:55-05:00

ladder jacks good condition please emails only. thanks

Lot of 2" ,1 1/2 pvc unions plumbers save (delco) $21

2009-11-09T13:35:00-05:00

approximately 6 pvc unions

i believe they are universal 2 inch or 1 1/2 slip

aluminum ladder (University City) $75

2009-11-09T13:21:21-05:00

24 foot aluminum ladder in good condition. Call 215-724-7376 and ask for Carolyn or send e-mail. Cash only.

28 foot ladder (art museum) $175

2009-11-09T13:08:00-05:00

Near Mint Condition 28 foot ladder. Willing to part with it for $175, if anyone is interested please feel free to give me a call at 215-900-8243.

Dewalt 18v wet/dry vac (bensalem) $100

2009-11-09T13:03:01-05:00

tool rareley used w/fresh 18v batt. Interested call 215-416-9609

Dewalt 18v XRP drill/hammer drill W/batt&charger (bensalem) $175

2009-11-09T13:01:50-05:00

This drill list new @ $265.00 and is in very good cond. Interested call 215-416-9609

Werner Electricians ladder (Bensalem) $50

2009-11-09T13:01:13-05:00

Six foot Werner step ladder used for light duty around the house. In perfect condition. Call Mike @ 215-468-7441 for more info.....serious inquiries only.

Precision Milling Machine - New (Baltimore/Washington) $950

2009-11-09T12:56:15-05:00

I'm selling a Poseidon milling machine. It's a copy of an EMCO Maier FB-2, made under license from EMCO.

It's a few years old (4+/-?) but has never been used. The back story is, I bought it from a guy who was an EMCO collector. He had a couple FB-2's and a number of their lathes. He loved their stuff. Seeing EMCO had licensed the design interested him so he bought it from Taiwan...arranged the paperwork and picked it up personally off the boat. He had it sitting next to his other (unused) FB-2 for a couple years. When he and his wife split, he needed to part out his metal shop. I bought it having always wanted to set up a shop of my own, but I just haven't gotten around to it and now I could use the $.

It's a nice piece of gear. Lathes.uk speaks well of the Taiwanese versions of the FB-2.
http://www.lathes.co.uk/emcomiller/
Taiwan is NOT China. This is a well-made, precision mill.

I'm sharing all this because people might wonder how a machine several years old has never milled a single piece. But it hasn't. Brand new.
$950 obo

BTW: the mill is bigger than it appears in the pics.

Used Red metal tool box (18th and JFK, Center City) $1

2009-11-09T12:52:03-05:00

Used red metal tool box. Has one shelf inside. The box has a lid with a metal clasp. $1.00. Located in the Sterling Apts in Center City. Call 215-523-6292 to buy.

BRAND NEW HITACHI FRAMING GUN $200

2009-11-09T12:47:44-05:00

FOR SALE:

BRAND NEW PROFESSIONAL HITACHI MODEL NO. NR 83A2(S)

THE FRAMING GUN WAS NEVER USED AND IS IN THE BOX.

AVAILABILITY: 1

PRICE: $200.00 EACH

215-396-2710 MONDAY TO FRIDAY, 9AM TO 5PM

craftsman ratchet wrenches (delco) $15

2009-11-09T12:29:31-05:00

three box end ratcheting wrenches.

two are craftsman and one is KD

Kellogg-American Air Compressor Tank (Kimberton PA) $125

2009-11-09T12:23:21-05:00

This is a Kellogg-American air compressor 80? gallon tank. Can be used to store compressed air or can be restored with a motor and compressor pump. Dated 1965, tank only, no motor, no compressor. Commercial grade equipment. I can load it onto your pick-up with a fork lift.

Sawzall (Gladwyne, PA) $50

2009-11-09T12:14:54-05:00

Practically brand new! I only used one of the blades - still has a couple more brand new!!

Hedge Clippers (Gladwyne, PA) $10

2009-11-09T12:08:07-05:00

A couple yrs old, very little use.

Durabuilt 9.6 volt Rechargeable Drill Tool Kit (northeast) $30

2009-11-09T11:51:57-05:00

Durabuilt 9.6 volt drill, comes with charger and battery and bits. I bought it a year ago and only used it a few times to hang shelves and pictures. Asking for 30 dollars or best offer.

24 FT ALUMINUM PIC (19036) $200

2009-11-09T11:47:48-05:00

BRAND NEW ALUMINUM PIC 24 ft long by 12 inches wide
cash only and you will need to pick up
484-557-5035 Chris

Starter Kit: Ryobi 5" Random Orbit Sander (Bala Cynwyd, PA) $100

2009-11-09T11:47:08-05:00

New Sanders: Ryobi 5" Random Orbit Sander, Ryobi Corner Cat Finish Sander, Black and Decker Drill and Rotary Saw and Various Saws - handsaws and hand tool - wrench

Work Mate 400 (Lansdale, PA) $40

2009-11-09T11:41:18-05:00

Work Bench
Workmate 400
Excellent condition
$40.00
Cash Only
Call Rick (215) 767- 9241
Other tools available

Weatherguard Saddle Toolbox (Glenside) $250

2009-11-09T11:40:28-05:00

Weatherguard model #126 saddle type truck tool box
Black
Very good condition
Locks/unlocks from either side of truck
Sliding tool tray included
Also have kit which allows toolbox to be mounted to TracRak system
Box originally sold for $560.00

snap on tool box (perkasie) $4100

2009-11-09T11:35:46-05:00

up for sale is a snapon bottom and top box with a snapon half cabinet hung on the side. The entire set up is no more than six months old, very lightly used with hardly any visible blemishes. No tools went into the box dirty!! The bottom box is a krl722 with a stainless top and drawer protectors. The half cabinet is a krl 715 with a shelf and two pull out drawers. The top box is a kra481, is has a gas strut opening lid and sits on the stainless top with no issue. Every drawer has a liner and are in good shape, also have he manual and touch up paint! i will deliver the box's up to a certain distance! Looking to move the box fast my price is $4100.00 offers excepted though! call 484-744-0130 or email me at Freed774@yahoo.com. thanks for your time. seth

Band Saw/Sander - 12" Craftsman (Lansdale, PA) $125

2009-11-09T11:35:24-05:00

Band Saw/Sander
12" Craftsman
Extra blades
Good condition
$125.00
Cash Only
Call Rick (215) 767-9241
Other Tools available